Providing Fine Furniture Protection Guardian Custom Products Since 1923 McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Join Our E-Mail List!
 
Measuring Your Table

  Before proceeding, look underneath your table, the manufacturer name or table
  model number maybe stamped there or if you have the original sales receipt for
  your table set the information should be listed on there also. Your table could be
  one of thousands of table patterns we have on file or can obtain from the
  manufacturer, you do not need to provide a table template.

   Please write the table manufacturer name and number either on the order form
   downloaded, received in your DIY kit or on a separate sheet of  paper. You will
   also need the exact width and length dimensions of the table's flat surface. You
   may refer to the diagram to the below on how to measure your table. This
   information will help us to verify the table pattern sizes with your actual table
   and to customize the table pad to fit your particular table.


  
 Tables come in many shapes and sizes. Before you start measuring your table,
   you must identify the "flat surface measurement" of your table top. Table pads
   should rest on the flat surface of the table. If they extend over the unsupported
   beveled edge they will break down with use.

   
  
Find your table shape and how to make a paper pattern of your table surface,
   Click Here. 
Diagram explaining length/width measuring of table
Diagram showing typical construction of pad up to 48
A table pad up to a width of
48" will have one fold.
A table pad up to a width of
48 1/16" or over will
have two folds.
Measuring the Flat Surface
Be sure to use a metal tape when measuring for tablepad. Cloth or plastic measuring tapes will stretch and cause accurate measurements.
Measuring the flat surface, table with straight edge Measuring the flat surface, tiered bevel edge
Measure the flat surface table with continuous rolled edge Measuring the flat surface, table with OG Bevel edge
Measuring Drop Leaf Tables
  1. Comes with two drops.
  2. The center section of the table pad can be one section or two, depending on the tables' shape.
  3. Measure the center first and each drop separately, being certain to note the size and quantity of any extra extensions as well.

    Note: A drop leaf table without any center extensions is priced as one table pad.
Diagram of how to measure retangular drop leaf table Diagram of how to measure round drop leaf table
Diagram of table pad for tables under 80
For tables that measure
under 80" without leaves    inserted:


Your pad will be made in two
main sections with appropriate
number of leaf pad pieces as
   specified.
Diagran of table pad for tables 80    For tables that measure 
80" or over without leaves    inserted:


Your pad will be made in three
main sections with appropriate
number of leaf pad pieces as
   specified.
BBB-Accredited Business A+ Rating 


Guardian Table Pad DBA Guardian Custom Products

Toll-Free: 800/444-0778            Fax: 800-755-7237           Local: 419/872-6400           Fax: 419/872-4774

       Americna Express Logo     Mastercard Logo
             Personal Checks
All Table Pad are MADE IN AMERICA!!   Copyright 1996-2013    All Rights Reserved    
 By using this site your agree to our Terms of Use       
To review our Privacy Policy information
Website designed by: webmaster@guardian-tablepad.com
       Discover Logo      VISA logo
                  Money Orders
Home Pricing/Online Ordering Table Extension Pad Conference Tables/Office Furniture Billiard Table Cover Card Table Xtender
Game Table Top Sew EZ Board Laptop Leveler  Protex Tablecloths Leaf Storage Bag